Radio Controlled Flashes - controlling power output?

This is the section for general questions and tips about flashes and lighting.

Moderators: Bob Andersson, Thomas, Bjorn van Sinttruije

Radio Controlled Flashes - controlling power output?

Postby Solok » Thu Feb 23, 2012 7:40 pm

I currently have 2 SB-600's, and I'm thinking of getting an SB-700 as well. I am however, having some problems triggering my flashes, since I tend to position them in positions that are "inconvenient" to the CLS system.

Therefore, I'm looking into radio controllers, namely Pocketwizard's, but I'm not entirely sure of how they work. Currently, I can control the strength of the flash output by using my D90's built in commander function. If I get a PW, can I still use the same menu to control the flash output? Or will I be forced to actually go to the SB-600, and physically change the power setting on the flash? Or can I change the power setting on the transciever? (I'm used to shooting on manual power, so the TTL-function isn't something I'm going to miss)
Nikon D700
AF-S 28mm f/1.8G
AF-S 60mm f/2.8G
AF-S 85mm f/1.8G
2 x Speedlight SB-600
Yongnuo RF-603 and other accessories
User avatar
Solok
 
Posts: 195
Joined: Mon May 12, 2008 4:22 pm
Location: Uppsala, Sweden

Postby Canon 500D » Sat Mar 03, 2012 11:43 pm

To use the TTL Metering system, you will need a compatible trigger set like the Pocketwizard mini/flex. I am not sure though whether the camera's menus will work or not to control it. I know they have a 'zone controller' to set ratios.
Canon EOS 500D
Lenses: EFS 18-55mm IS, EF 50mm F/1.8 II

Image
User avatar
Canon 500D
 
Posts: 916
Joined: Mon Dec 21, 2009 3:27 am
Location: UK


Return to Flashes, strobes and lighting

Who is online

Users browsing this forum: No registered users and 2 guests